Fig. 1From: Comparison of point-of-care peripheral perfusion assessment using pulse oximetry sensor with manual capillary refill time: clinical pilot study in the emergency departmentSchema of the device BRT and the standardized visual CRT measurements. CRT was measured using a chronometer. The examiner compressed the fingertip for 5 s, signaled by “start compression” and “release compression” beep sounds. When the fingertip was released from compression, the examiner began the standardized visual CRT measurement. A pulse oximetry sensor was applied, and the fingertip was compressed and released 5 s after starting compression. There is a SD card slot on the back panel of the device. The waveforms of the light intensity were stored in the SD card. The data was calculated by a pre-fixed algorithmBack to article page